www.vishay.com for technical questions in eu rope, contact: ff1aresistors@vishay.com document number: 20038 1 for technical questions in americas/asi a, contact: ff2bresistors@vishay.com revision: 27-mar-07 d.. ap vishay thick film, rectangular chip resistors for conductive gluing features ? agpd-terminations for conductive gluing ? protective overglaze ? metal glaze on high quality ceramic ? compliant with "restriction of the use of hazardous substances" (rohs) directive 2002/95/ec (issue 2004) ? excellent stability ( r/r 1 % for 1000 h at 70 c) notes ? these resistors do not feature a limited lifetime when operated with in the permissible limits. howe ver, resistance value drift increasing over operating time may result in exceeding a limi t acceptable to the specific application, thereby est ablishing a functional time. ? marking and packaging: see appr opriate catalog or web pages ? power rating depends on the max. temperature at the solder poi nt, the component placement density and the substrate material notes 1. measuring conditions in acc. to en 140401-802 2. rated voltage: 3. the power dissipation on the resistors generates a temperature rise against the lo cal ambient, depending on the heat flow sup port of the printed-circuit board (thermal resistance). the rated dissipation applies only if the pe rmitted film temperature of 155 c is n ot exceed. standard electrical specifications model size power rating p 70 c w limiting element voltage max v ? temperature coefficient ppm/k tolerance % resistance range e-series inch metric d10 ap 0402 1005 0.063 50 100 200 1 5 100r - 10m 10r - 10m 24 + 96 24 zero-ohm-resistor: r max < 200 m , i max = 0.5 a d11 ap 0603 1608 0.1 75 100 200 1 5 18r - 10m 3r6 - 10m 24 + 96 24 zero-ohm-resistor: r max < 200 m , i max = 0.7 a d12 ap 0805 2012 0.125 150 100 200 1 5 18r - 10m 3r6 - 10m 24 + 96 24 zero-ohm-resistor: r max < 200 m , i max = 0.8 a d25 ap 1206 3216 0.25 200 100 200 1 5 18r - 10m 3r6 - 10m 24 + 96 24 zero-ohm-resistor: r max < 200 m , i max = 1 a technical specifications parameter unit d10 ap d11 ap d12 ap d25 ap rated dissipation at 70 c 3) w 0.063 0.10 0.125 0.25 limiting element voltage 2) v ? 50 75 150 200 insulation voltage (1 min) v peak > 75 > 100 > 200 > 300 thermal resistance 1) k/w 870 550 440 220 insulation resistance > 10 9 category temperature range c - 55 to + 125 (+ 155) failure rate h-1 0.3 ? 10 -9 weight/1000 pcs g 0.65 2 5.5 10 p x r
document number: 20038 for technical questions in europe, contact: ff 1aresistors@vishay.com www.vishay.com revision: 27-mar-07 for technical questions in americas/asia, c ontact: ff2bresistors@vishay.com 2 d.. ap thick film, rectangul ar chip resistors for conductive gluing vishay notes 1. preferred way for ordering products is by use of the part number. 2. please refer to table packaging, see below. 3. detailed bv number will appear on the packaging label. note 1. flame treated paper for sizes d10 and d 11. regular paper for sizes d12 and d25. part number and product description d.. ap - series part numbering: d1208058b5620fp5 1) model/size special character tcr value tolerance pac k ag i n g 2) special d100402 d110603 d120805 d251206 8 = agpd terminations for conductive glueing b = 100 ppm/k a = 200 ppm/k 0 = jumper 3 digit value 1 digit multiplier multiplier 7 = *10 -3 8 = *10 -2 9 = *10 -1 0 = *10 0 1 = *10 1 2 = *10 2 3 = *10 3 4 = *10 4 5 = *10 5 6 = *10 6 0000 = jumper f = 1 % j = 5 % p0 p5 pn pz b5 bn up to 2 digits product description: d12 ap 100 562r 1 % p5 d12 ap 100 562r 1 % p5 bvxxxx model tcr resistance value tolerance pac k ag i n g 2) special 3) d10 ap d11 ap d12 ap d25 ap 100 ppm/k 200 ppm/k 49k9 = 49.9 k 5r1 = 5.1 0r0 = jumper 1 % 5 % p0 p5 pn pz b5 bn customized part number is available on request packaging model reel tape width diameter pitch pieces/reel packaging code paper 1) blister d10 ap 8 mm 180 mm/7" 2 mm 10 000 p0 pz 330 mm/13" 2 mm 50 000 d11 ap 8 mm 180 mm/7" 4 mm 5000 p5 b5 255 mm/10" 4 mm 10 000 p0 330 mm/13" 4 mm 20 000 pn bn d12 ap 8 mm 180 mm/7" 4 mm 5000 p5 b5 255 mm/10" 4 mm 10 000 p0 330 mm/13" 4 mm 20 000 pn bn d25 ap 8 mm 180 mm/7" 4 mm 5000 p5 b5 255 mm/10" 4 mm 10 000 p0 330 mm/13" 4 mm 20 000 pn bn 5 p f 0 2 6 5 b 8 5 0 8 0 2 1 d
www.vishay.com for technical questions in eu rope, contact: ff1aresistors@vishay.com document number: 20038 3 for technical questions in americas/asi a, contact: ff2bresistors@vishay.com revision: 27-mar-07 d.. ap vishay thick film, rectangular chip resistors for conductive gluing dimensions functional performance size dimensions [in millimeters] inch metric lw h t1t2 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.05 0.2 + 0.10 - 0.15 0603 1608 1.55 + 0.10 - 0.05 0.85 0.1 0.45 0.05 0.3 0.2 0.3 0.2 0805 2012 2.0 + 0.20 - 0.10 1.25 0.15 0.45 0.05 0.3 + 0.20 - 0.10 0.3 0.2 1206 3216 3.2 + 0.10 - 0.20 1.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 size solder pad dimensions [in millimeters] reflow soldering wave soldering inch metric a b l a b l 0402 1005 0.4 0.6 0.5 0603 1608 0.5 0.9 1.0 0.9 0.9 1.0 0805 2012 0.7 1.3 1.2 0.9 1.3 1.3 1206 3216 0.9 1.7 2.0 1.1 1.7 2.3 0402 0603 0 8 05 1206 90 8 0 70 60 50 40 30 20 10 0 0 0.1 0.2 0.3 0.4 0.5 power in w atts te mperature rise in c temperature rise 100 1k 10k 100k 1m 10m non-linearity 100 90 8 0 70 60 50 40 30 20 10 resistance v alue in non-linearity a 3 in db 1206 0 8 05 0603 0402 120 110 deratin g - 55 - 25 0 2 55 0 75 100 125 150 175 120 100 8 0 60 40 20 0 ambient te mperature in c 70 r ated power in % 100 1k 10k 100k 1m 10m 100 10 1 0.1 current noise resistance v alue in current noise in v/ v 0402 0603 0 8 05 1206
document number: 20038 for technical questions in europe, contact: ff 1aresistors@vishay.com www.vishay.com revision: 27-mar-07 for technical questions in americas/asia, c ontact: ff2bresistors@vishay.com 4 d.. ap thick film, rectangul ar chip resistors for conductive gluing vishay 1000 100 10 1 0.1 0.01 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 1 10 sin g le pulse maxim u m p u lse load, single p u lse; applica b le if p 0 and n 1000 and u u max ; for permissi b le resistance change e qu i v alent to 8 000 h operation pulse duration t i (s) pulse load p max (w) 1206 0 8 05 0603 0402 continuous pulse continuous pulse load p max (w) 100 10 1 0.10 0.01 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 1 10 1206 0 8 05 0603 0402 maxim u m p u lse load, contin u o u s p u lses; applica b le if p p ( ? am b ) and ? ? max ; for permissi b le resistance change e qu i v alent to 8 000 h operation pulse duration t i (s) 1206 0 8 05 0603 0402 200 0 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 110 pulse volta g e maxim u m p u lse v oltage, single and contin u o u s p u lses; applica b le if p p max ; for permissi b le resistance change e qu i v alent to 8 000 h operation pulse duration t i (s) 400 600 8 00 1000 1200 1400 pulse volta g e ? max (v) 1206 0 8 05 0603 0402 100 300 500 700 900 1100 1300
www.vishay.com for technical questions in eu rope, contact: ff1aresistors@vishay.com document number: 20038 5 for technical questions in americas/asi a, contact: ff2bresistors@vishay.com revision: 27-mar-07 d.. ap vishay thick film, rectangular chip resistors for conductive gluing d 25.. ap d12.. ap d 1 0.. ap d1 1.. ap 10k 1 m 10 m 140 120 100 8 0 60 40 20 0 ? = f [ ? s ] parameter: ? u 20 40 60 8 0 100 120 140 160 1 8 0 load in w 0.01 0.1 1 20 40 60 8 0 100 120 140 160 1 8 0 film temperature ? s in c 0.01 0.1 1 10 1 0.1 0.01 resistance chan g e r/r % r/r (t) = f [ r/r (t = 1000 h)] parameter: time 0.5 0.4 0.3 0.2 0.1 0 ? = f [p ] parameter: size 140 120 100 8 0 60 40 20 0 film temperature ? s in c stability nomo g ram typical values (for handlin g see g eneral explanations) resistance chan g e [ ? r/r] in % after 1000h te mperature rise in ? c ? = 20 c 40 c 60 c 8 0 c 100 c 120 c 140 c t = 1 0 0 0 0 0 h 1 0 0 0 0 h 5 0 0 0 h 2 0 0 0 h 1 0 0 0 h r/r [t = 1000 h] = f [ ? s] parameter: resistance value 0.25 w 0.125 w 0.0625 w 120 100 8 0 60 40 20 12 3 5 7 10 2 3 5 7 100 2 3 5 7 60 8 0 100 120 140 s u rface temperat u re ? s [ c] n u m b er of mo u nted resistors [pcs] power ratin g as a function of packa g in g density ( g uideline) ? u = 120 c ? u = 100 c ? u = 8 0 c ? u = 60 c ? u = 40 c ? u = 20 c ? = [ c ]
document number: 20038 for technical questions in europe, contact: ff 1aresistors@vishay.com www.vishay.com revision: 27-mar-07 for technical questions in americas/asia, c ontact: ff2bresistors@vishay.com 6 d.. ap thick film, rectangul ar chip resistors for conductive gluing vishay test procedures and requirements en 60115-1 test (clause) conditions of test requirements permissible change ( r / r ) stability class 1 or better d10 ap d11 ap d12 ap d25 ap stability for product types: 100 to 10 m 18 to 10 m d..ap resistance (4.5) - 1 % 1 % endurance at 70 c (4.25.1) u = ( p 70 x r ) u = u max ; whichever is less severe 1.5 h on; 0.5 h off; 70 c; 1000 h 1.0 % endurance at upper category temperature (4.25.3) uct = 125 c; 1000 h 1.0 % overload (4.13) u = 2.5 x ( p 70 x r ) 2 x u max ; duration: according the style 0.25 % rapid change of temperature (4.19) 30 min. at lct = - 55 c 30 min. at uct = 125 c; 5 cycles 0.25 % damp heat, steady state (4.24) (40 2) c; 56 days; (93 3) % rh 1.0 % applicable specifications ? en 60115-1 generic specification ? en 140400 sectional specification ? en 140401-802 detail specification ? iec 60068-2-x variety of env ironmental test procedures ? iec 60286-3 packaging of smd components
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
